User guide

-. Default router:

Specify the IP address of the default router (gateway) used for connecting devices attached to

different networks and network segments.

• DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your

network.

-. Obtain DNS Server via DHCP:

Automatically use the DNS server settings provided by the DHCP server. Click the View button

to see the current settings.

-. Use the following DNS server address:

Use to enter the desired DNS server by specifying the following:

* Domain name: Enter the domain(s) to search for the host name used by the Network Camera.

Multiple domains can be separated by semicolons (;). The host name is always the first part

of a Fully Qualified Domain Name, for example, myserver is the host name in the

Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the

Domain name.

* DNS servers: enter the IP addresses of the primary and secondary DNS servers.

5) Easy Install

You can activate or inactivate the Easy Install function in this window.

Cha

nge the a

dmin password or use the default password (admin) of cameras to be detected. If you

don’t want to use easy install function, inactivate checkbox. Click the Next button to go to next page.

Note: Easy Install is inactivated in default. This make the NVR detects ONVIF based all of network

cameras and registers automatically.