User guide

-. Synchronize with NTP server:
Synchronize the date and time of the NVR automatically with an NTP (Network Time Protocol)
server. Enter the IP address or the domain name of the NTP server, for example, time.nist.gov
or time.windows.com.
-. Set manually:
This option allows you to manually set the time and date.
4) Internet
The NVR supports Gigabit Ethernet connection. Please make sure that Ethernet port is connected to
the network.
Setting in regard to network can be executed
•
Obtain IP address via DHCP
Dynamic Host Configuration Protocol (DHCP) is a protocol that let network administrators centrally
manage and automate the assignment of IP addresses on a network. DHCP is enabled by default.
Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use
it to set a static, known IP address for a particular MAC address.
• Use the following IP address
To use a static IP address for the Network Camera, check the radio button and then make the
following settings:
-. IP address:
Specify a unique IP address for your Network Camera.
-. Subnet mask:
Specify the mask for the subnet the Network Camera is located on.
27