User guide

• User ID and Password

The user ID and Password must be 1 to 15 characters in length. It supports alphabets (A-Z),

numbers (0-9), and underscore(_). It is case-insensitive and cannot contain the following

characters:

“ / \ [ ] & % : ; | = , + * ? < > ` '

• Access Control

Assign the rights of playback, and PTZ control to the user.

Note: Factory default password for admin user is “admin”.

3) Date/Time

Set the date, time, and time zone according to your location. If the settings are incorrect, the following

problems may occur:

-. Incorrect time display on the video files.

-. Incorrect time display on the event logs.

•

Time

Zone

Select your time zone from the drop-down list. If you want the server clock to automatically adjust

for daylight savings time, select the “Automatically adjustment for daylight saving time changes”.

Note: The Factory default of time zone is “(GMT-05:00) EASTERN TIME (US & CANADA)”.

• Time Mode

-. Synchronize with computer time:

Synchronize the date and time of the NVR automatically with your computer time.