™ Series HD Mini Cube Camera Quick Guide ™ Smart Secure Technology™
1. Description The Network Camera supports the network service for a sensor image with progressive scan, which can be monitored on a real-time screen regardless of distances and locations. By using its dedicated program, many users are able to have an access to the Network Camera at once or a single user can monitor various network cameras at the same time. It also enables users to play, store and retrieve a monitoring image by using a PC.
• Rear View NO Name 1 PIR Sensor(option) 2 Microphone/Speaker (option) 3 Light(option) 4 Network Connector Description The camera is equipped with a PIR Sensor that has a maximum range of 5 meters for detecting movement in the dark. The camera is equipped with a Microphone and Speaker. Twoway audio support allows for remote users to listen in on an area and communicate with visitors or intruders. The camera is equipped with White LED that illuminates the scene.
2. Installation 2.1 Connection • • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-over cable is used for directly connection to PC, while a direct cable is used for connection to a hub. Micro SD memory slot Insert the SD memory card. Connecting the Power Connect the supplied DC 5V power adaptor to the camera. • Connecting the Wireless using WPS button Follow steps for a proper operation. 1.
Notes: 1. WPS may not work if your AP is configured with a "hidden" SSID. 2. If any WPS-enabled AP is not detected, the camera will search APs for 60 seconds after pressing the WPS button, and if the camera still can not detect an AP after 1 minute, the wireless setup will be cancelled. 3. If a camera is assigned with a fixed IP outside the AP's network segment, wireless setup will fail. 2.2 Network Connection and IP assignment The Network Camera supports the operation through the network.
3. Select the camera on the list and click right button of the mouse. You can see the pop-up menu below. 4. Select Assign IP. You cam see a Assign IP window. Enter the required IP address. Note: For more information, refer to the Smart Manger User Guide.
3. Operation The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows. Note: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls. 3.1 Access from a browser 1. 2. 3. Start a browser (Internet Explorer). Enter the IP address or host name of the Network Camera in the Location/Address field of your browser. You can see a starting page.
3.2. Access from the internet Access from the internet once connected, the Network Camera is accessible on your local network (LAN). To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera. This is enabled from Setup > System > Network > NAT. For more information, please see “3.5.
The resolution drop-down list allows you to select the most suitable one out of video resolutions to be displayed on live view page. The protocol drop-down list allows you to select which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. 2) Control toolbar The live viewer toolbar is available in the web browser page only. It displays the following buttons: The Stop button stops the video stream being played.
You can configure the network camera by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the setup tools When accessing the Network Camera for the first time, the “Admin Password” dialog appears. Enter your admin name and password, set by the administrator. Note: If the password is lost, the Network Camera must be reset to the factory default settings. See “3.6 Resetting to the Factory Default Settings”. 3.
www.cymbol.com ©2013 Cymbol Products, Inc. All rights reserved.
