User guide

 AE & AWB

•

Exposure control

This page provides access to the advanced exposure control settings for the network camera.

- Mode: Supports exposure modes to control the amount of light detected by the camera

sensor based on settings for light conditions. The default setting is Auto mode.

* Automatic: Automatically sets the amount of light detected by the image sensor.

* Hold Current: Fixes the exposure at its current state.

- Value: Select a value in the drop-down list to tune the exposure. The default setting is 5.

- Enable Backlight Compensation: Set this checkbox to activate the BLC operation.

- Flicker Mode - Provides the options for flicker.

* 50Hz: Select at 50 Hz environments.

* 60Hz: Select at 60 Hz environments.

- Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera.

* Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15.