™ Series Network Transmitter Quick Guide ™ Smart Secure Technology™
1. Product Description This manual applies to the Network Transmitter. The Network Transmitter supports the network service for an existing analog camera. An analog image entered can be monitored on a real-time screen regardless of distances and locations. By using its dedicated program, many users are able to have an access to the Network Transmitter at once or a single user can monitor various network transmitters at the same time.
• Mounting The Network Transmitter is supplied with a mounting kit for wall mounting. The mounting bracket can be positioned for mounting the Network Transmitter on a vertical surface. • Overview Front Panel NO 1 2 3 4 Function USB Reset Button Network Indicator Power Indicator Description Not used Press this button to restore the factory default settings Lights when a remote user is connected to the unit. Lights when the power is on.
NO 3 Function Power adaptor connector Network connector(PoE) 8-pin I/O terminal 4 Audio In/Out 5 Video In/Out 1 2 Description Connects the supplied power adapter or an external power supply 12V DC or 24V AC, max. 5W. RJ-45 port compatible with 10/100Mbps, which have a PoE function. Connects RS485, alarm input and output. Connects the port to the microphone and speaker, which have an amplifier function. Connects the video input and output. 2.
3. Select the camera on the list and click right button of the mouse. You can see the popup menu as below. 4. Select Assign IP. You cam see a Assign IP window. Enter the required IP address. 3. Operation The Network Transmitter can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox and Google Chrome with Windows. Note: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls. 3.
3. You can see a starting page. Click Live View or Setup to enter web page. 4. The encoder’s Live View page appears in your browser. 3.2. Access from the internet Access from the internet Once connected, the Network Transmitter is accessible on your local network (LAN). To access the video encoder from the Internet you must configure your broadband router to allow incoming data traffic to the video encoder.
3.3 Setting the administrator password To gain access to the product, the password for the default administrator user must be set. This is done in the “Admin Password” dialog, which is displayed when the network transmitter is accessed for the setup at the first time. Enter your admin name and password, set by the administrator. Note: The default administrator username and password is “admin”. If the password is lost, the Network Camera must be reset to the factory default settings. See page 9. 3.
• Control toolbar The live viewer toolbar is available in Microsoft Internet Explorer only. It displays the following buttons: The Stop button stops the video stream being played. The Pause button pause the video stream being played. The Snapshot button takes a snapshot of the current image. The Digital Zoom button activates a zoom-in or zoom-out function for video image on the live screen. The Full Screen button causes the video image to fill the entire screen area. No other windows will be visible.
You can configure the network transmitter by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the setup tools. When accessing the Network Transmitter for the first time, the “Admin Password” dialog appears. Enter your admin name and password, set by the administrator. If the password is lost, the video encoder must be reset to the factory default settings. See “3.8 Resetting to the Factory Default Settings” on the User Guide. 3.
www.cymbol.com ©2013 Cymbol Products, Inc. All rights reserved.
