GrooveRise Alarm Clock & Radio Speaker System for iPod Quick Start Guide:
Warranty Cygnett 12 Month Manufacturers Warranty Register online at www.cygnett.com to activate your warranty. Introduction Thank you for purchasing Cygnett's GrooveRise iPod Alarm Clock & Radio Speaker System. Now you can experience the freedom to wake up to your favourite songs while the GrooveRise recharges your iPod around the clock. With a feature-packed remote you can command your iPod & GrooveRise from the comfort of your bed.
1 Contents Getting to know the GrooveRise . . . . . . . . . . . . . . . . . 2 Connecting the GrooveRise . . . . . . . . . . . . . . . . . . 4 Operating the GrooveRise Audio Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Alarm & Alarm Mode Setting . . . . . . . . . . . . . . . 6 Snooze/Nap Mode Setting . . . . . . . . . . . . . . . . . 7 Sleep Mode Setting . . . . . . . . . . . . . . . . . . . . . . .
Getting to know the GrooveRise Top View 10 1 5 9 1. Alarm1/Alarm 2 2. Alarm Mode 3. Alarm Set 4. Time 5. Power 2 3 4 6 7 8 11 6. Dimmer 7. Sleep 8. Audio 9. Snooze 10. Set +/11.
Getting to know the GrooveRise Rear View A BC A. DC 12V B. Line In C.
Connecting the GrooveRise Connecting the GrooveRise Take the AC Power Adaptor and plug it into the Groove Rise 12v DC IN Port (A) at the back of the unit. Plug the AC Power Adaptor into the wall socket and switch it on. Press the Power button (5) located on the top of the GrooveRise. The unit should now be on and ready for use. Please note: The unit will have default settings of AUX mode, 20dB volume and display a time of 00:00.
Operating the GrooveRise Operating the GrooveRise Audio Modes: When the GrooveRise is turned on it will be in AUX audio mode. If you have already docked your iPod, press the Audio button on the top of the unit and click through AUX/RADIO/IPOD audio modes until you have reached the desired audio mode. If there is not an iPod docked, press the Audio button on the top of the unit to choose between AUX or RADIO modes.
Operating the GrooveRise cont. Operating the GrooveRise Alarm and Alarm Mode Setting: Press the Al1/Al2 button to enable alarm 1, alarm 2 or both. Once you have enabled at least one alarm, press the Al Set button. Use the Al Set button to switch between the hours and minutes to set the alarm time. Then use the Set +/- wheel to adjust the hours or minutes desired. Set each alarm separately. After you have set the alarm(s) press Al Mode to switch between AUX/RADIO/IPOD as the alarm type.
Operating the GrooveRise cont. Operating the GrooveRise Snooze/Nap Mode Setting: Press the Snooze/Nap button on the top of the unit after the alarm has gone off. The alarm will turn off temporarily and will go off again after 9 minutes approximately. You may use this feature until you turn the alarm off. Sleep Mode Setting: The sleep mode allows you to set the unit to turn off after a certain amount of time (15/30/45/60 minutes).
Operating the GrooveRise cont. Operating the GrooveRise Tuning the Radio: When in Radio mode, use the Set+/- wheel to adjust to the FM frequency you want. Volume Setting: The Default volume setting is 20dB (min volume is 0dB and max volume is 40dB). To increase the volume, spin the Volume wheel clockwise. To decrease the volume spin the Volume wheel anti-clockwise.
GrooveRise Remote Control 9 Remote Control standby mute source memory al1/al2 time set alm mode alm set enter sleep menu snooze / dimmer volume – volume + standby: power on/off.
GrooveRise Remote Control cont. snooze/dimmer: press to snooze alarm for 9 minutes, when alarm is not activated press to dim the LCD screen.
N15150 Z385
©2008 Cygnett www.cygnett.com iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.