User Manual

3
Secure the bike with the thru-axle
of your bike.
5
4
6
Original thru-axle
07
Inse the quick release skewer
into the axle of T2 and install the
nut in place, but don't tighten it
yet, in order to install the bike
frame.
Adjust the shifter untill the chain
is on the smallest sprockets of
both chainwheel and cassette.
Shake the bike frame after installation to make sure the frame is
secured to T2.
① Failure to properly secure the bike can result in serious propey damage and personal inju.
② Never adjust the quick release skewer or thru axle while someone is sitting on the bike.
③ There're still a few bike frames incompatible with T2. Stop the installation immediately if any
abnormalities occur.
④ Please refer to the disclaimer and don't hesitate to contact us for any installation problems.
WARNING!