User Manual

2.6 Power Connection
Please use the AC adapter only that comes
with T2 to power the device.
The AC cable can be replaced as you like.
AC adapter
AC cable
10
T2 has 2 working modes, unplugged mode and plug-in mode. Plug-in mode can
provide a better riding experience. The main functional dierences between the
two modes are as follows.
Unplugged mode
Signal connection
When you sta riding, you need to pedal to
generate power for wireless connection.
After you stop, the LED indicator may go out,
but the stored power will be available for the
wireless signal to work for 5 more minutes.
Ready to connect
Bluetooth and ANT anytime
Able to simulate downhill and
ywheel ineia
When riding at low speed (<15KMH),
maximum gradient suppoed <15%.
No eect at high speed.
15%
Downhill and ineia
simulation
Climbing simulation
Plug-in mode
Notice: It is recommended for high-intensity riders to ride in plug-in mode for electricity to
dissipate heat for T2 after stop.
2. Indicators
3 Working Status
1. Working modes
Shines steadily: ANT data broadcast working properly
Shines steadily: bluetooth connected
Flashes: bluetooth not connected
Shines steadily: Power supply works properly
Unable to simulate downhill and ywheel ineia