User Guide

ManualsBrandsCYCMOTOR ManualsBMZ DisplayCYCMOTOR Topology DS103 TFT and Remote BMZ Display

Functionalities

Walk Assist

Hold in the DOWN button to activate walk assist. Note that it takes 3 seconds to activate & will deactivate

immediately when the button is released.

Settings

Long press the MENU button within 15 seconds of switching on the display to enter the “Settings” page.

Note that once the system has been activated for longer than 15 seconds, you will need to restart the motor

system to enter the settings menu.

The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.

(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact

technical_support@cycmotor.com for further assistance.