User Guide

Quick Start Guide
02
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
[e-mail] for further assistance.
© 2022 CYCMOTOR LTD
Quick Start Guide
After unboxing and installing your CYC motor system, there are two main things you need to set up.
1. Change your Battery No. settings according to your rated voltage.
Within 15 seconds of turning on your display, long press the MENU button to enter the settings functions.
Press UP/DOWN to navigate the settings page & MENU to select.
Please note that 6s to 9s is not compatible with the CYC systems. This will be removed in future batches. Our
aplogies for the confusion.
2. Change your Wheel settings according to your bike’s wheel size.
3. Now, you can set things up like your temperature and speed unit as well as your brightness level.
Otherwise you’re good to go!
6s = 22.2 V
7s = 25.9V
8s = 29.6V
9s = 33.3 V
10s = 36V
11s = 40.7V
12s = 44.4 V
13s = 48V
14s = 52V