User Guide

THROTTLE

RAMPING TIME

This is the time it takes for the motor to achieve the

required input. For example, if you open the throttle

fully, it will take 250ms (by default) before the motor

gives you full power. It will gradually ramp up to full

power within the set time. We recommend not to set

this below 150ms.

INPUT DEADBAND

This value pertains to opening the throttle when it’s

completely closed. This is the amount of throttle can

be moved from the zero position without generating a

response from the motor. If this value is set lower, your

throttle will engage quicker and vice versa.

MAX VOLTAGE

This value should be the same as the Throttle Voltage

Reading when the throttle is closed and sets the

output when it is not active.

MIN VOLTAGE

This is the output of the throttle when opened fully

and is pre-set when purchased. This does not need

any change with CYC supplied throttles.

THROTTLE AUTO SETUP

If you’d like to use your own throttle, this will

automatically setup the minimum and maximum

voltage accordingly. Follow the steps as prompted on

the screen.