User Guide

Basic Settings
04
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
[e-mail] for further assistance.
© 2022 CYCMOTOR LTD
The power output will be distributed evenly across the chosen number of assist levels (or gears) according
to the Assist Level Configuration and Speed Limit Assist settings on your CYC Motor (BAC) mobile app:
Note that the App Assist Level shown below can be customized in the app.
Factory setting
Press the MENU button to enter the factory settings menu. Selecting YES will restore all parameters on the
display to factory settings. Note that this will not affect your app settings.
App Assist Level
1 - 0.3 (30% by default)
2 - 0.6 (60% by default)
3 - 1 (100% by default)
3 Assist Levels
0 (Neutral) 0 (Neutral) 0 (Neutral)
1
2
3
1
2
3
4
5
1
2
3
4
5
6
7
8
9
5 Assist Levels 9 Assist Levels