User Guide

Basic Settings
04
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
[e-mail] for further assistance.
© 2022 CYCMOTOR LTD
Start password
Press the MENU button to get into the password setting menu. Start input ON will switch on password upon
start-up.
You need to input the right password before start within 30 seconds. The display will power off automatically
if the password is entered incorrectly three times.
Advance setting
Press the MENU button to get into the advance settings menu. You will need to enter your Start Input
Password. The default password is 1919.
There is only 1 parameter which needs to be set as all others should be neglected and will not affect your
system: Assist levels.
Go to the NEXT PAGE on the display. Here, you can choose the number of assist levels (or gears) accordingly.
The available options are 3, 5, or 9 assist levels.