APT 750c DISPLAY GUIDE Display Guide support@cycmotor.
01 Product Details Product Details Electrical Parameters • 3.2 inch IPS screen • 36V / 48V / 52V / 72V battery supply • Rated operating current: 40mA • Off leakage current < 1uA • Max output current to controller: 100mA • Operating temperature: -20 – 70 °C • Storage temperature: -30 – 80 °C Dimensions & Materials Materials • Product shell - ABS plastic • Transparent window - High strength Acrylic Dimensions L 110mm x W 68.2mm x H 68mm Features • Suitable for low temperature: Max -20 °C • High-contrast 3.
02 Functionalities Main Functionalities UP DOWN Power On/ Off Press and hold the POWER button for 1 second to turn the display on/ off. The display will automatically shut down when there is no operation for a period of time. Mode Switch Double press the POWER button to change between RACE Mode & STREET Mode. Note that this will not change the mode in real-time but rather set the start-up mode (Street Mode recommended). Change the mode in real-time via mobile app.
02 Functionalities Assist Level Operating Short press the UP/DOWN button to change the assist level. The top assist level is 9 where 0 is neutral. The amount of assist levels can be adjusted according to the user’s preference. Speed Display Switch Short press MENU button to change the speed mode: Speed -> AVG Speed -> MAX Speed. RT = Real time speed AVG = Average speed MAX = Maximum speed *If there is no operation for 5 seconds, the display will return to real-time speed automatically.
03 Parameter Settings Parameter Settings Button Navigation Double press the MENU button to get into the settings menu. The press interval must be less than 0.3 seconds. Press the POWER button to change between the Display Settings & Basic Settings. Press the UP/DOWN buttons to change between the parameters, MENU button to select, & UP/DOWN to change the selected parameter. Press the MENU button to deselect parameters & to set changes made.
03 Parameter Settings Brightness Press the UP/ DOWN button to change the brightness of the display’s backlight. “I” is the darkest & “IIIII” is the brightest. Auto off Press the UP/DOWN button to change the auto power off time. This can be set between 1 to 9 minutes or off. Battery Ind Press the UP/DOWN button to change your battery indication. This can be set to Voltage, Capacity, Percentage, or off.
03 Parameter Settings Self - Testing Please ignore! This setting is for CYC Motor Ltd use only. DO NOT attempt to change these settings as you risk corrupting display settings. Clock Press the MENU button get into the clock setting menu. Then, press the UP/DOWN button to set Year/ Month/ Day/ Hour/ Min/ Sec. Basic Settings Wheel Press the UP/DOWN button to change the wheel settings. The optional wheel diameter is 16 to 29 inch. Battery Press the UP/DOWN button to change battery voltage settings.
04 Basic Settings Start password Press the MENU button to get into the password setting menu. Start input ON will switch on password upon start-up. You need to input the right password before start within 30 seconds. The display will power off automatically if the password is entered incorrectly three times. Advance setting Press the MENU button to get into the advance settings menu. You will need to enter your Start Input Password. The default password is 1919.
04 Basic Settings The power output will be distributed evenly across the chosen number of assist levels (or gears) according to the Assist Level Configuration and Speed Limit Assist settings on your CYC Motor (BAC) mobile app: Note that the App Assist Level shown below can be customized in the app. App Assist Level 1 - 0.3 (30% by default) 3 Assist Levels 5 Assist Levels 9 Assist Levels 0 (Neutral) 0 (Neutral) 0 (Neutral) 1 1 1 2 2 3 4 2 - 0.
04 Basic Settings Information Press the MENU button to show information of the eBike, including the average and maximum speeds, the current trip distance, ODO, and range. Press the MENU button to select Product Infor. This menu will show you the display’s information including its hardware and software versions as well as the display’s serial number. Press the MENU button to select Battery Infor.
05 Error Codes Error Codes In certain circumstances, an error code may appear on your display. Refer to the CYC Motor (BAC) mobile application user guide for instructions on how to clear the errors and for further details on what these errors entail. Contact technical_support@cycmotor.com for assistance.
06 Quick Start Guide Pin Layout 1. 2. 3. 4. 5. Red wire: Anode (36V to 72V) Black wire: GND Yellow wire: TxD (display -> controller) Green wire: RxD (controller -> display) Blue wire: Power cord to the controller Certification CE / IP65 (waterproof ) / ROHS. Quick Start guide After unboxing and installing your X1 Pro or X1 Stealth, there are a few things you need to set up and check.
