Specifications

OVER-RIDE PROCEDURE
To illustrate the PIN over-ride procedure we will assume a PIN of 4,3,2,1.
1. If indicators are already flashing (and horn is sounding - see Optional
Features: HORN) allow the system to reset with all doors closed.
2. Turn ignition switch to ON position, the status LED will remain lit.
3. Turn ignition switch to the ACC position and count the LED flashes.
4. Turn ignition switch ON when the 4th flash has extinguished.
5. Turn back to ACC position and count 3 flashes, switch ignition ON.
6. Turn back to ACC position and count 2 flashes, switch ignition ON.
7. Turn back to ACC position and count 1 flash, switch ignition ON.
When all four digits have been entered correctly, the car’s indicators will
flash once to confirm that the immobiliser is disarmed. The engine can be
started and the car driven. The automatic arming feature will ensure car is
secured again if the ignition is left off for more than 40 seconds.
- Page 5 -