Specifications

OPERATIONS
REMOTE CONTROLS
The P355 is supplied with two rolling code remote
controls. Each time a button is pressed, the code
rolls to a new code. Each code is never used twice. A
small green Light Emitting Diode (LED) will light
when a remote control button is pressed.
ARMING AND DISARMING
To arm or disarm the system, press the main button
on the remote control. The vehicle’s indicators will
confirm a valid remote operation. Two flashes for arm and one flash for
disarm. The status LED located on the car’s dash or steering column will
flash when the immobiliser is armed.
AUTOMATIC ARMING
The P355 will automatically disable the engine 40 seconds after the ignition
switch is turned off. Pressing the main remote control button after the system
has automatically armed, will command the P355 to disarm for another 40
seconds. Switching the ignition switch to the ON position is the only way to
stop/reset the auto-arming countdown.
MAIN BUTTON
SECONDARY
BUTTON
LED
KEYRING
- Page 3 -