Specifications

SPECIFICATIONS
- Page 13 -
Manufactured by Dynamco Pty Ltd.
Model Number P355.
Standards met AS/NZS 4601
Supply voltage +9VDC - 15VDC.
Current consumption less than 20mA (while armed).
Country of manufacture China (in Dynamco’s ISO-9002 facility).
RF Transmission Freq 433MHz
TROUBLE SHOOTING
System won't arm. LED on dash won't flash.
! Make sure that ignition switch is in the OFF position.
! Ensure the vehicle battery is not flat.
! Try your spare remote transmitter unit.
System won’t disarm. LED on dash won’t extinguish.
! Try spare remote control
! Use Emergency PIN to override system and contact nearest Cyclops service centre.
The remote fails to operate
! If the remote fails to operate and the LED does not light up when the button is pressed then
change the battery. To do this you will need a small screwdriver. See page 10 for details on
battery replacement