Specifications

Main Features Explained

• Digital Tilt Sensor

When armed, system records bike inclination on two separate axis. If bike is

then tilted ±3° or more on either axis, the siren will be triggered. Note that the

siren may trigger even when bike has not been tilted due to the shock sensor.

• 2-Stage Shock Sensor

When armed, system can be set to trigger Warning Chirps and/or Full Siren

Blast based on the level of shock to the bike. Sensor 1st and 2nd stage triggers

are user-adjustable, and either setting or both can be turned completely off.

• Starter Immobilizer

Used to cut ignition or fuel lines when system is Armed (optional in Sleep).

• Panic Siren

Allows siren to be activated via transmitter to alert others in an emergency.

• Sleep Mode

Shuts down most functions to conserve power. Useful to prevent battery

drain when bike not used for extended periods. Also acts as a Valet mode.

• Silent Mode

Disables full siren blast and Warning chips, but allows Conrmation chirps.

Useful when using an optional paging system without alerting the thief.

• Manual Disarm

Allows you to disarm the system if you lose your transmitter or its battery dies.

(See bottom of page 11 for details.)

• Auto Arm

NOTE: CYCLONE will never Auto Arm while the Ignition is on.

Enabled by default. When enabled, Arms 5 min. after the ignition goes off.

You can also program which sensors are to be enabled for Auto Arm (pg. 14).

• Sector Bypass System (SBS)

Prevents siren from becoming a public nuisance. Shock, tilt or ignition sensors

will be individually bypassed if they trigger 5 times. You can disable this feature.

• Siren Trigger Memory

When you disarm, system informs you (via siren chirps and LED ashes) if

the siren went off in your absence.