Specifications

TRANSMITTER FUNCTIONS

PANIC SIREN

With IG key off, press both transmitter buttons for about

1 second. The siren will then go off for 10s or 30s. Push

either button to stop the siren. When the siren sequence

stops, Cyclone will arm itself.

SILENT MODE

Stops siren triggers but allows Arm/Disarm conrmation

chirps. Useful with an optional paging system, alerting

you to theft attempts without the thief knowing.

Activate. Disarm and within 20 sec. turn on IG, then

press transmitter Btn-1 (about 3 sec.) until the si-

ren chirps 1 time. Turn off IG. Press Btn-1 to Arm.

Deactivate. Disarm and within 20 sec. turn on IG, then

press Btn-1 until the siren chirps 2 times, then turn off IG.

SLEEP MODE

This mode allows you to conserve vehicle battery power

by reducing the electric current consumption of the 866F.

This feature is useful when you will not be riding the bike

for extended periods. All security features are disabled by

default. You can enable the Starter Kill Immobilizer for

greater security (avg. current consumption < 2mA).

TIP: Sleep Mode also acts as “Valet Mode,” useful to disable

security features when sending the bike in for maintenance.

Activate Sleep. Disarm Cyclone, and within 20 sec. turn on IG and

press Btn-2 (about 3 sec.) until you hear 3 siren chirps in rapid succes-

sion. The 3 chirps conrm that Sleep Mode is activated. Turn off IG.

System Operation

Push Btn-1

for 3 sec.

Push Btn-2

for 3 sec.

Push Both

Buttons

NOTE. Within 20 sec. of activating Sleep Mode, if you turn IG off

and then press a transmitter button, you will enable the Starter Kill

Immobilizer in Sleep Mode. This will cause the status LED will ash.

See next page for details on Enabling/Disabling the Immobilizer.