Specifications

1
CYCLONE 866F OWNER’S GUIDE
System Operation
Feature Programming
TABLE-2 Feature Selection Menu
No. Feature Description Selection
Siren
Chirps
1 AutoArm Sensor Enable (see No. 3)
Both Sensors 2
“Selected Sensor” 1
2 Shock Sensor “Full Trigger”
ON 2
OFF
1
3
Transmitter Button-2 Arm/AutoArm
with “Selected Sensor”
Tilt 2
Shock
1
4 Duration of Full Siren Blast
10 sec. 2
30 sec.
1
5 Sensor Bypass System (SBS)
ON 2
OFF
1
6 Manual Disarm Code
6
6
7 Rest Settings to Factory Default
7
FACTORY DEFAULT SETTINGS SHOWN IN BOLD TEXT ABOVE
1) Arm and then Disarm Cyclone.
2) Turn on the Ignition within 20 seconds of disarming Cyclone.
3) Within 5 seconds of turning on the Ignition, press both transmitter but-
tons until the Status LED lights solid (press for about 5 sec.).
4) Press button-1 the same “No.” of times as the feature you want to select in
Table-2. The LED will then ash repeatedly the same number of times as the
feature number you chose. Now press button-2 to change the “Selection.”
4URNå)'åON
THENåPUSH
BOTHåBUTTONS
FORååSEC
0USHå"TN
SAMEå.OåOF
TIMESåASåTHEå
FEATUREåTO
BEåSELECTED
0USHå"TN
TOåCHANGE
THEåSELECTED
FEATURE