Specifications

TRANSMITTER FUNCTIONS
1
Disabling Starter Kill Immobilizer. While in Sleep Mode, turn
the Ignition on and off. Within 20 seconds of turning off the Ignition,
press either transmitter button for about 1 second and release. The
siren will chirp 3 times, and the LED will ash once.
Deactivation. With the Ignition on, press transmitter button-2 for 3
seconds and release. The siren will chirp 5 times. Sleep Mode is off.
IMPORTANT! The only time your transmitter will work during Sleep is
the rst 20 sec. after the Ignition is turned on & off. You must therefore
exercise extreme caution when enabling the Immobilizer during Sleep.
If you lose all your transmitters in Sleep mode while the Immobilizer is
enabled, you will not be able to disable the Immobilizer. In such a case,
you must have your 866F service by your CYCLONE dealer. If you are
worried about this, simply do not enable the Immobilizer during Sleep.
TABLE-1 Siren & Status LED Response to Changes in System State
ACTION or STATE SIREN STATUS LED
Arming 1 chirp 2 ash
Disarming (nothing triggered) 3 chirps
3 ashes
Disarming (Shock triggered) 3 + 1 chirps
1 ash
Disarming (Tilt triggered) 3 + 2 chirps
2 ashes
Disarming (Ignition triggered) 3 + 3 chirps
3 ashes
Armed —
1 ash every 2s
Warn Trigger 2 chirps
2 ashes
Full Trigger 10s or 30s
Flashes for 10/30s
Panic Siren 10s or 30s
Flashes for 10/30s
IGN on with Immobilizer on in Sleep no sound
1 ash every 2s
System Operation