Specifications
12
TRANSMITTER FUNCTIONS
PANIC SIREN
With the Ignition key off, press both transmitter buttons
for about 1 second. The siren will then go off for 10s or
30s. Push either button to stop the siren. The 866F will
auto-arm once the full siren sequence stops by itself.
SILENT MODE
This feature prevents siren triggers from being heard, but
arm/disarm Conrmation chirps remain audible. Silent
Mode is especially useful with the optional Pager System,
which alerts you to threats without the thief knowing.
To Activate, rst turn on the Ignition, then press trans-
mitter button-1 for 3 seconds and release. The siren will
chirp 1 time. Press button-1 again for 3 seconds to exit out of
Silent Mode (siren will then chirp twice).
SLEEP MODE
This mode allows you to conserve vehicle battery power
by reducing the electric current consumption of the 866F.
This feature is useful when you will not be riding the bike
for extended periods. All security features are disabled by
default, but you can enable the Starter Kill Immobilizer
each time you turn off the Ignition Key.
TIP: Sleep Mode also acts like a “Valet Mode,” useful to
disable security features when sending the bike in for main-
tenance.
Activation. With the Ignition on, press transmitter button-2 for 3 sec-
onds and release. The siren will chirp 3 times. Sleep Mode is on.
Enabling Starter Kill Immobilizer. While in Sleep
Mode, turn the Ignition on and off. Within 20 seconds of
turning off the Ignition, press either transmitter button
for about 1 second and release. The siren will chirp 1
time, and the LED will ash once. If Ignition is turned
on with the Immobilizer on, the siren is silent.
System Operation
0USHå"TN
FORååSEC
0USHå"TN
FORååSEC
0USHå%ITHER
"UTTON
0USHå"OTH
"UTTONS