Installation & Assembly

Installation

Tools required

Please read these installation instructions thoroughly before commencing installation.

The Cycloc products were designed for use on a wall structure in good condition and suitably robust to carry the

weight of the bike(s) to be hung from it. It is your responsibility to ensure that the product is installed on a suitable

surface.

It should be noted that the maximum weights speciﬁed in the product guidance are static bike weights and do not

allow for any dynamic loading, and are provided for guidance purposes only.

Sufﬁcient expertise is required for the correct and safe installation of this product. It is your responsibility to ensure

that the installer has a satisfactory working knowledge of the equipment required to achieve a robust and secure

installation of the product, including the power tools and mechanical wall plug anchors to be used, and has the

knowledge and skills required to determine whether the wall structure is suitable to carry the relevant weight.

If any of the above requirements are not complied with when installing the product, neither Cycloc nor Andrew

Lang Product Design Ltd shall be liable or otherwise responsible for any damage to goods or injuries sustained

because of the incorrect or inappropriate installation of Cycloc products.

For more information on product liability and the consequences of incorrect installation of Cycloc products, please

refer to our Terms and Conditions, available at https://cycloc.com/ps/content/3-terms-and-conditions.