Instruction manual

8
b) Light Surface Decontamination
 Autoscrub Fine Grade (blue) – 72-320x2
i. Recommended applications
ii. Ideal for removing light contamination build-up.
Perfect for newer vehicles
Genuine Cyclo Pad Covers
Each pad cover has a specific function in the detailing process. May be used for applying polish, cleaning interior surfaces, buffing wax, or adding that final
touch to bring paint and interiors to a gorgeous shine. The pad covers fit snugly over foam pads with a durable elastic cuff. For additional tips and application
guides, please refer to the application chart included on the back cover of this manual.
Pad Cover Type Product Number
Microfiber Suede Pad Cover 73-515x4
Microfiber Terry Pad Cover 73-530x4
Cotton Terry Pad Cover 73-550x4
a) Extreme Shine
 Microfiber Suede Pad Cover – 73-515x4
i. Recommended applications
ii. Ultra-soft and ideal for removing surface residue
iii. Buff out for extreme shine
b) Final Wax Buff
 Microfiber Terry Pad Cover – 73-530x4
i. Recommended applications
ii. The preferred cover for applying polish and buffing wax
iii. Its hooked fibers remove surface residue.
c) Upholstery
 Cotton Terry Pad Cover – 73-550x4
i. Recommended applications
ii. Perfect for cleaning interior surfaces and for buffing, polishing
iii. Drying exterior surfaces
Genuine Cyclo Discs
Genuine Cyclo ProShine (cushioned abrasive “Micro-Mesh”) discs and Fastcut Discs (non-woven scrubbing discs similar to a
soft Scotch-Brite) are handy for scratch removal and floor and board cleaning. ProShine Discs require a 72-920 ProShine™
Interface Pad that fits between a Velcro attachment system (Rubber Pad Holders or ProGuard Orbital Backing Plates.
Type Product Numbers
ProShine Abrasive Discs in grades of
1500, 2400, 4000, 6000, 8000, 12000 72-701x4, 72-702x4, 72-704x4, 72-706x4, 72-708x4 & 72-712x4
Fastcut 600 Grit Disc 74-660x10
a) Deep Scratch Removal
 ProShine Discs 1500-4000 (72-701x4 - 72-704x4)
i. Recommended applications:
Discs are ideal for removing scratches and use water as a lubricant for discs. Start with 1500 or 2400 and you should be able to
switch over to light compounding liquids after 4000.
Requires interface pad # 72-920.
b) Light Scratch Removal
 ProShine Discs 2400-12000 (72-702x4 – 72-712x4)
i. Recommended applications: Discs are ideal for removing light paint or plexiglass scratches. Use soapy
water or detailing spray as a lubricant for discs. Start with 2400 or 4000 grade disc on one head of the
polisher and just use a Green Foam Polishing Pad or Blue Foam Light Polishing Pad on the opposite
head to minimize amount of sanding area and impact.
Once sanded, you should be able to switch over to light compounding, swirl remover or polish after application of 6000 or higher
grade or discs.
Requires interface pad p/n 72-920.
c) Aggressive Surface Scrubbing and Cleaning
 Fastcut 600 Grit Disc (74-660x10)
i. Use Fastcut discs for scrubbing floors, tile, showers, hockey arena boards (puck marks); excellent for
removing bugs from wing leading edges, auto bumpers and more.
Machine Operating Instructions
Your Cyclo Polisher has two heads rather than the single head common on other orbital-motion tools. As soon as the Cyclo Polisher is placed on a working
surface and powered on, orbital “hand-rubbing” action takes place. Each sides reactive forces from its polishing or scrubbing is counteracted by the opposite
side. Therein lies the secret of the tool’s ability to do many different types of jobs that could not be done with a single head orbital or a rotary tool. The two heads
move in a circular motion without forced spinning and are timed and weighted to balance away vibration forces. All the energy from the motor is directed to the
polishing or scrubbing action, and none returned to vibrating the user.
IMPORTANT POLISHER OPERATION INFORMATION:–EXCESSIVE PRESSURE DOES NOT IMPROVE PERFORMANCE AND MAY DAMAGE THE
POLISHER’S TRANSMISSION. The hand-like action of the polisher’s heads prevents surface damage regardless of the pressure applied. Move the
machine slowly. You need not be afraid of burning, gouging, or swirling the surface.
General Polishing Instructions
a) After you have placed the pads or bonnets on your Cyclo Polisher, connect the tool to the power supply.
b) Apply a small amount of the proper polish or compound to each pad, just enough to spread across and fully cover the pad.
c) Place the Cyclo Polisher, pad side down on the surface, move the tool around before turning it on in order to distribute the polish within the pad over
the surface.