Instruction manual

12
JOIN ORBIT CLUB TODAY
Join the Cyclo Toolmakers’ Orbit Club and you’ll receive preferred
customer discounts, special news, usage tips, and exclusive members-only
offers.
Simply go online and provide us with your email address. Just visit the
Cyclo website at www.cyclotoolmakers.com and click the Orbit Club link to
sign up.
Then, you’ll be the first to receive:
• Performance tips to increase productivity
• News and events to improve your business
• Special offers and product news
We look forward to seeing you there!
Disposal and Recycling information:
EU countries only Do not dispose of electric power tools in the household waste! In accordance with the European Directive
2002/96/EG on Waste Electrical and Electronic Equipment and transposition into national law, used electric power tools must be
collected separately and recycled in an environmentally responsible manner.
USA and other non-EU countries Do not dispose of electric power tools in the household waste! You may return your used polisher to
Cyclo Toolmakers, Inc to be recycled in an environmentally friendly manner.
Technical Specifications
Power Supply Nominal Current Output
Model 5, Model 5-Pro : 115 V a.c., 60 Hz, 2.0A .35 h.p. (.23kW)
Model 5C, Model 6CE: 230 V a.c., 50 Hz 1.0A .35 h.p. (.23kW)
Speed 5 & 5C: 2800 to 3200 RPM
Speed 5-Pro, 5C-Pro: 650 to 3200 RPM
Speed 6CE n
0
= 3200/min
Speed 6CE-Pro n
0
= 650 to 3200/min
Weight: 6.5 lbs (2.9 kg)
Pad or Bonnet Capacity 2 x 4” (2 x 100 mm) diameter
Motor: Alternating current, Universal, Semi-Enclosed 24-bar commutator
Electric Cord: Model 5 - 9.5' long, Non-Marking 16 AWG/3 SJTOW
Model 5-Pro - 9.5' long, Non-Marking 16 AWG/3 SJTOW
Model 5C, Model 5C-Pro - 2.5 m long, Non-Marking 3x 3G1mm
2
Model 6CE,Model 6CE-Pro - 2.5 m long, Non-Marking, 3x 3G1mm
2
Housing: Heavy-duty cast aluminum
Orbital Stroke Length 5/8 in. (16 mm)
Sound Pressure (LpA): 82.5 dBA (uncertainty 0.57 dBA)
Sound Powel (Lw): 94.1 dBA (uncertainty 0.57 dBA)
Hand-Arm Vibration: 1.27 m/sec^2 (uncertainty 0.17 m/sec^2)
Testing Labs: Intertek ETL SEMKO for CE EMC and Safety (per EN 60745-1, -2,-3)
and S&V Solutions for noise (ISO 15744 and EN 0745) and hand-arm
vibration (ISO 20643 and EN/ISO 28927)
THE
APPEARANCE
OF YOUR
CYCLO
POLISHER
Each of our Cyclo Polishers are hand
crafted with the same superior level of
quality and workmanship. As all
handmade items will vary slightly, we
cannot guarantee that each polisher will
be identical with every other one of our
polishers. You may notice light sanding
or buffing marks in the hand-finished
aluminum castings. These are all marks
of an authentic Cyclo Toolmakers tool.
Naturally, Cyclo Toolmakers, Inc. will
replace or repair material or
workmanship defects. Refer to the Cyclo
Toolmakers Warranty for further
information.