User guide

Joule GPS User Guide page 38
CHAPTER 8: DEVICE MENU
Record Control
End Ride Time
Odometer
Memory Remaining
Clear Ride Memory
Clear History
MEMORY MENU MENU INPUT OPTION
DEVICE MEMORY
The Memory page allows the user to monitor and manage the space available on the Joule GPS as well as set some recording
and saving attributes. Also the odometer value can be monitored, updated or reset. Ride summary data, used for history reports
(Chapter 5), and complete Ride files can be cleared here.
Main Menu
Ride
History
Sensors
Training
Navigation
User
Device
Back to Dashboard
9:34A 71º
INT
[ENTER]
Press & Hold
3 sec. to enter
Menus. Scroll
to Device;
Press •[ENTER] ;
Select an option,
FROM DASHBOARD
Device
Date and Time
Display
Memory
Altimeter
About Joule
Back to Main Menu
9:34A
Memory
Record Control
Speed/HR
End Ride Time
15-90 min
Odometer
1526
Reset Odometer
Memory Remaining
33.4 Hours
Clear Ride Memory
Clear History
Back to Device
9:34A
Speed/Heart Rate. Sets when data will be recorded. Select Speed to record whenever
speed is present (via either the hub, a speed sensor or the GPS) and greater than
3.6 kph (2.2 mph). Select Heart Rate to record when a heart rate is present.
15, 30, 60, 90 minute and Never options for auto saving a ride once it is ended.
For example: Selecting the 30 min option would cause the ride to automatically
save after 30 minutes of inactivity. “Never” means the user will save manually.
Displays total miles or kilometers accumulated since device was put in service or
since last reset. This number is editable by selecting it and pressing [ENTER];
Increase/decrease each digit using +/- buttons; Enter moves to next digit. Press
Enter twice at end of field to exit field.
Select Reset Odometer to reset ride time, and total Kilojoules of work to zero.
The amount of ride storage space available, in terms of ride time.
Clears all ride files from device. Does not clear ride history data used for reports.
Clears all ride history data (no data available for reports).