Owner`s manual

17
SELECT
MODE
MAIN MENU
RETURN TO RIDE
CLEAR MEMORY
TEST
SETUP
Setup (Zeros)
These settings determine if zero readings will be
included in average readings. For example,
when coasting zero powering readings are
recorded. This setting determines if these zero
coasting readings are included in the average
console display.
Setup (Zeros)
1) From [MAIN MENU] press [DOWN ARROW]
to scroll to [SETUP USER RIDE] and press
[SELECT].
SELECT
MODE
SETUP
WATTS AVG ZEROS YES
SPEED AVG ZEROS YES
CAD AVG ZEROS YES
RESET
RETURN
Setup (Zeros)
4) Press [DOWN ARROW] to scroll to [ZEROS] and
press [SELECT].
5) Press [SELECT] to enter [WATTS AVG ZEROS].
Press [UP ARROW] or [DOWN ARROW] to toggle
between [YES] or [NO]. Press [SELECT] to accept
changes and reenter the scrolling menu.
6) Repeat steps 3, 4, and 5 for [SPEED AVG ZEROS]
and [CAD AVG ZEROS]. Press [SELECT] to accept
changes and reent
er scrolling menu.
SELECT
MODE
ZEROS
WATTS AVG ZEROS YES
SPEED AVG ZEROS YES
CAD AVG ZEROS YES
RESET
RETURN
Setup(Zeros)
7) To reset user settings press [DOWN
ARROW] to sc roll to [RESET] and press
[SELECT].
8) To begin a ride, press [DOWN ARROW] to
scroll to [RETURN] and press [SELECT]. Press
[DOWN ARROW] to scroll to [RETURN] and
press [SELECT].