Owner`s manual

SELECT

MODE

Interval Memory Mode

1) To access stored interval information

press [UP ARROW] or [DOWN ARROW] to

scroll to the interval line (See Interval

Mode) and hold [MODE] for two (2) sec-

onds. This brings interval mode to the fore-

ground. Press [MODE] to move interval

numbers up, and [SELECT] to move interval

numbers down. Current intervals read black

[INT] and memory intervals read white

[INT] in a black box.

CLOCK

02:06:07P

MPH

CAD

WATTS

INT: 2

Find

Hub consoles are “paired” or “learned” at the factory.

Learning involves viewing and storing each device

ID into the console.In addition, there is a feature

called “Find” that allows the user to searh for stored

devices in the event a sensor has lost contact with

the console for any reason. To initiate the Find, hold

[Mode] and [Select]. Release when “Find” appears

on the bottom of the screen after about 2 seconds.

When the search is successful

, the transmission icon

appears in the upper right corner.

SELECT

MODE

CLOCK

02:06:07P

MPH

CAD

WATTS

FIND

Console Find

Find

From the dashboard display, press and hold

[Mode] and [Select] until find appears and

release (approx. 2 seconds).