User`s guide

Browser Access With the Web Manager
42
AlterPath OnSite Administrator’s and User’s Guide
The following table lists the modem installation and configuration procedures
for the three types of modems, with links to where they are documented.
Browser Access With the Web Manager
Both OnSite administrative users and authorized users can access the
Cyclades Web Manager from a supported browser.
The OnSite administrator can use the Web Manager to configure users and
ports and security. An authorized user can access connected devices through
the Web Manager to troubleshoot, maintain, cycle power, and reboot
connected devices. An authorized user can also use the Web Manager to
manage power outlets on optionally connected AlterPath PM IPDUs, monitor
the OnSite’s temperature, and change their own passwords, but they do not
have access to the OnSite screens for configuring users or ports. For details
about using the Web Manager, see:
• Chapter 3, “Web Manager Introduction”
• Chapter 5, “Web Manager Wizard Mode”
• Chapter 6, “Web Manager for Administrators”
• Chapter 4, “Web Manager for Regular Users”
Table 1-18: Tasks for Modem Installation and Configuration
Modem Type
Where Documented
Internal modem • “To Configure the Internal Modem [Expert]” on page 267
External modem • “To Configure an AUX Port for PPP [Expert]” on page 266
PCMCIA modem or
wireless phone card
• “To Configure a Modem PCMCIA Card [Expert]” on page 308
• “To Configure a GSM PCMCIA Card [Expert]” on page 312
• “To Configure a CDMA PCMCIA Card [Expert]” on page 318