User`s guide

Support for Multiple Types of Access
38
AlterPath OnSite Administrator’s and User’s Guide
• If no, go to decision 6.
Example for Decision 5
• If user jordan trying to access port 4 is in a group called windows_ca1
that has a Default Permission of full, then jordan is given read/write
and power management access.
• If user jolanda trying to access port 4 is in a group called
windows_ca2 that has a Default Permission of no access, then jolanda
is denied access.
• If user jennifer is not a member of any group with a Default
Permission specified, then her access request is passed to Decision 6.
Decision 6: Check Generic User’s Default Permissions
Note: If an access request gets this far, the Default Permission of the Generic
User is the only permission that could apply.
6. What are the Default Permission for the Generic User?
The specified permissions apply: no access, read-only, read-write, or read/
write/power management.
Support for Multiple Types of Access
The OnSite provides multiple types of remote and local access described in
this section.
Remote OnSite Access Options
Remote OnSite administrators and authorized users can connect remotely in
the following ways:
• Using the Web Manager in a browser from LANs, WANs, GSM or
CDMA cell phones, either through the Ethernet port or a PPP or login