User`s guide

OnSite Port Permissions
32
AlterPath OnSite Administrators and Users Guide
See “Configuration>Security” on page 275 for the Web Manager screen and a
link to the procedure.
OnSite Port Permissions
In the default configuration, no users except “admin” and “root” can access
any ports. The OnSite administrator can configure access for regular users as
desired.
The following table summarizes the default port access permissions and
default authentication types (Auth Type) and provides links to where the port
permissions are described in more detail.
The OnSite administrator must take the actions described under “Where
Documented” to configure any other types of access and authentication than
the defaults defined in the previous table.
Understanding KVM Port Permissions
Generic KVM port permissions (which are configured for the “Generic User”
in the Web Manager and “[Generic Users]” in the OSD) apply to all regular
users and groups, unless the OnSite administrator configures other
permissions for individual users or groups.
Table 1-15: Default Port Access Permissions
Port Type Default
Access
Default
Auth Type
Access Types Where Documented
KVM None None No access
Read only
Read/Write
Full access (Read/
Write/Power
management)
“Understanding KVM Port
Permissions” on page 32
“To Assign KVM Ports to
a User or Group [Expert]”
on page 296
Serial None Local None
Implicitly: Full
(Read/Write/Power
management)
“To Configure Serial Port
Access for Users [Expert]”
on page 240