User`s guide

Introduction 27
OnSite Security Profiles
The security profiles can be selected and a custom security profile can be
created using any of the following methods:
• Web Manager Wizard, Step 1: Security Profile
See “To Select or Configure a Security Profile—Wizard” on page 167.
• Web Manager in Expert mode under Configuration > Security Profiles
• CLI command. under config > security > profile
ICMP
SSH to serial ports is allowed Not allowed:
• SSH root login
• SSH to serial ports
• Telnet to serial ports
• Raw connection to serial ports
• Bidirectional connection to serial ports
Authentication is required to access serial
ports
IPSec
Direct access to KVM ports cannot be
configured
RPC
Not allowed:
All versions of SNMP
SSH v1
SSH port default = 22
Telnet to OnSite
Table 1-12: Secured Security Profile Services/Features (Continued)
Enabled Services/Features Disabled Services/Features