User`s guide
OnSite Security Profiles
22
AlterPath OnSite Administrator’s and User’s Guide
OnSite Security Profiles
An important part of configuring the OnSite is selecting a security profile that
helps enforce the security policies of the organization where the OnSite is
being used. The administrative user defines the security profile during initial
configuration. The security profile can be changed later.
A security profile must be selected during initial configuration. The security
profiles control the following:
• Which services are turned on:
• FTP
•HTTP
• HTTPS
Table 1-8: Tasks for Configuring Users
Tool
Where Documented
Web Manager • “To Add a User [Expert]” on page 294
• “To Assign KVM Ports to a User or Group [Expert]” on page 296
• “To Configure Serial Port Access for Users [Expert]” on page 240
• “To Configure Users to Manage Power Outlets on IPDUs [Expert]” on
page 196
OSD • “To Configure Users [OSD]” on page 459
• “To Add a User [OSD]” on page 460
• “To Give a User Access to KVM Ports [OSD]” on page 463
• “To Configure Who Can Access Serial Ports [OSD]” on page 449
• “To Enable Power Management Through a KVM Port [OSD]” on page
440
• “To Enable Power Management Through a Serial Port [OSD]” on page
448
CLI • “To Add a User With CLI” on page 545