User`s guide

Introduction 17
OnSite Authentication Options
The following table shows the options for configuring authentication using
the Web Manager, OSD or CLI utility.
Table 1-5: Tasks for Configuring Authentication Methods
Component Web Manager OSD CLI
OnSite Unit
“Configuration>Security
>Authentication” on page
276
“To Configure an OnSite
Login Authentication
Method [Expert]” on
page 277
“Configure>Authentic
ation Screens [OSD]”
on page 470
“To Configure an
Authentication
Method and an
Authentication Server
for OnSite Logins
[OSD]” on page 491
cli> config
security
authentication
KVM Ports
1
“Configuring
Authentication for Direct
Access to KVM Ports” on
page 216
“To Configure an
Authentication Method
for Direct Access
to KVM Ports [Expert]”
on page 217
“Configure>General:
Authentication Type
Screen” on page 391
“To Configure an
Authentication Type
for Direct KVM Port
Access” on page 392
N/A
Serial
Ports
2
“Configuration>Serial/
AUX>Physical Ports>
Access” on page 239
“To Configure a Serial
Port Authentication
Method [Expert]” on
page 241
“Configuring Serial
Ports [OSD]” on page
446
“To Specify an
Authentication
Method for Serial
Ports [OSD]” on page
450
cli> config
physicalports
[specify “all” or a
port number from 1-
8] access
authtype