User`s guide

How Configuration Files Changes Are Managed
576
AlterPath OnSite Administrator’s and User’s Guide
How Factory Defaults Are Saved
A compressed copy of the factory default configuration files is stored in the
factory_default_files.gz compressed file for possible restoration in the /
mnt/hdCnf/backup directory. The following screen example shows the
file.
Restoring Configuration Files
The following table provides links to where the procedures for restoring
configuration files are described.
T To Restore the OnSite Configuration Files to
the Last Saved Version
This procedure assumes that you or a previous administrator has previously
run the saveconf command, or clicked the “Save” button on the Web
Manager Mgmt → Backup/restore screen after making changes to the
configuration. This procedure restores the configuration files to the state they
were in when they were last backed up.
1. If you are logged into the Web Manager as an administrative user, click
the “Load” button on the Web Manager Mgmt > Backup/restore screen.
OnSite Linux command line Enter the restoreconf command
OnSite CLI utility Enter the CLI config restorefromflash
command
[root@ONS /]# ls /mnt/hdCnf/backup
factory_default_files.gz
To Restore the OnSite Configuration Files to the Last Saved Version Page 576
To Restore the OnSite Configuration Files to the Factory Defaults Page 577
Options for the restoreconf Command Page 580
Table A-3: Options for Saving Configuration File Changes
Environment Action