User`s guide

How Configuration Files Changes Are Managed
574
AlterPath OnSite Administrators and Users Guide
Note: Be aware that the --doformat option erases the flash memory and
installs the boot image into the image1 area. See “Options for the create_cf
Command” on page 577 for other options.
7. The following text appears when the operation completes.
8. Configure the OnSite to boot from flash.
See “To Boot from an Alternate Image in U-Boot Monitor Mode” on page
571, if needed.
9. Enter the reboot command.
How Configuration Files Changes Are Managed
Changes to configuration files can be made without backing up the
configuration files by performing the actions shown in the following table.
Changes made to the configuration files persist after a reboot. If you upgrade
software, any changes to configuration files are brought forward after the
upgrade. (This allows you to upgrade software on the OnSite without losing
all your user configurations.)
Creation of image N completed.
...
# reboot
Table A-1: Options for Saving Configuration File Changes
Environment Action
Web Manager Click the “try changes” button.
OSD Select the “Save” button on any configuration screen.