User`s guide

Miscellaneous Procedures 553
Configuring Dial-Out
If the administrator chooses to create another chat file in /etc/
chatscripts, the administrator must change the filename
specified after the -f option to the new filename and specify the new
filename in the
outPort.pppcall definition in the /etc/generic-
dial.conf file.
T To Configure the /etc/ppp/peers/wireless File
This procedure configures the device name for the port, the user name, and
other optional values in the peers file in /etc/ppp/peers using the default
filename wireless.
1. Open the
/etc/ppp/peers/ wireless file for editing.
2. Enter the device name for the port.
The following screen example shows /dev/ttyM1 entered as the device
name for PCMCIA card slot 1.
3. Enter the user name after the user keyword.
4. Make any other edits you desire.
5. Save and quit the file.
6. Go to "By default, the /etc/ppp/peers/wireless initiates a dial-in
connection by reading the chat script configured in the /etc/chatscripts/
wireless file..”
[root@OnSite root]# vi /etc/ppp/peers/wireless
nodetach
#debug
/dev/ttyM1
user claro