User`s guide
Using the CLI Utility
544
AlterPath OnSite Administrator’s and User’s Guide
Show
The following screen example shows the use of the show command. After
entering
config physicalports 1
, entering show general at the Ports[1}
prompt displays the configuration parameters set for the selected serial port.
CLI Options
The following table shows options that can be entered when invoking the
CLI.
cli> config physicalports 1
Ports[1]> show general
general:
alias:
protocol: consoletelnet
speed: 9600
flow: none
parity: none
datasize: 8
stopbits: 1
Table 8-7: CLI Options
Option Description
q
Suppresses the output of error messages from the CLI.
t time
The timeout in minutes. Default =10 minutes.
T Disables idle timeout. Same as "-t 0."
s Save changes to flash. Same as savetoflash). Batch mode
only.
r Activate changes. Same as runconfig. Batch mode only.
f filename
Executes the commands in the file
filename
.