User`s guide
OTP Configuration
504
AlterPath OnSite Administrator’s and User’s Guide
The following table lists the OTP authentication configuration tasks and
where they are documented.
Table 8-1: Tasks for Configuring OTP Authentication
Task Where Documented
Edit the /etc/otp.conf file to configure
the location used for storage of OPIE
databases.
“Editing the otp.conf File” on page 506
Run the /bin/do_create_otpdb script
to initialize OTP and mount the directory to be
used for OPIE database storage.
“To Specify the Location for the OTP
Databases” on page 507
Configure OTP or OTP/Local as the
authentication method for access to all serial
ports or individual serial ports.
Web Manager: “To Configure a Serial Port
Authentication Method [Expert]” on page 241
OSD:“To Specify an Authentication Method
for Serial Ports [OSD]” on page 450
CLI: cli> config
physicalports
[specify “all” or a port
number from 1-8]
access authtype
[otp | otplocal]
Configure OTP authentication for dial-ins
through PCMCIA modem, GSM, and CDMA
cards.
Web Manager: “Configuring a Modem
PCMCIA Card” on page 307,
“Configuring a GSM PCMCIA Card” on
page 311, “Configuring a CDMA
PCMCIA Card” on page 316
OSD: “To Configure a PCMCIA Card
[OSD]” on page 487
CLI
: cli> config network
pcmcia
[specify a slot number “1” or “2”]
[specify
modem | cdma | gsm]
otpauthreq