User`s guide

Configuring Authentication [OSD]
496
AlterPath OnSite Administrator’s and User’s Guide
The changes are stored in /etc/ldap.conf on the OnSite.
T To Configure a RADIUS Authentication
Server
[OSD]
Perform the following when the OnSite or any of its ports is configured to use
either the RADIUS, Local/RADIUS, RADIUS/Local, or RADIUSDownLocal
authentication methods.
1. Go to Configure>Authentication.
2. Select RADIUS.
The first RADIUS screen appears.
3. Fill in each screen according to your local setup of the RADIUS server or
servers.
4. Select Save.
The changes are stored in /etc/raddb/server on the OnSite.
T To Configure a TACACS+ Authentication
Server
[OSD]
Perform the following to identify the authentication server when the switch or
any of its ports is configured to use either the TACACSPlus, Local/
TACACSPlus, TACACSPlus/Local, or TACACSPlusDownLocal
authentication method.
1. In the OSD, go to Configure>Authentication.
2. Select TACACSPlus.
The first TACACSPlus screen appears.
3. Fill in the screens according to your local setup of the TACACSPlus
server.
4. Click Save once you are done with the last screen.
The changes are stored in /etc/tacplus.conf on the switch.