User`s guide

Configuring Authentication [OSD]
494
AlterPath OnSite Administrator’s and User’s Guide
b. Enter set_timezone.
A list of timezones appears followed by a prompt asking you to enter
a number of a timezone.
c. Enter the number of the timezone where the OnSite is located.
d. Logout from the console session and close the terminal.
4. In the OSD, go to Configure>Authentication.
5. Select Kerberos.
The “Kerberos Server IP” screen appears.
6. Enter the information in the screens according to the setup of the Kerberos
server.
7. Save the changes when you are finished entering information in the last
Kerberos screen.
T To Configure an LDAP Authentication Server
[OSD]
Perform the following to configure the authentication server when the OnSite
or any of its ports is set up to use either the LDAP, Local/LDAP, LDAP/Local,
or LDAP/Down Local authentication method. Before starting this procedure,
find out the following information from the LDAP server’s administrator:
• The distinguished name of the search base
• The LDAP domain name
• Whether to use secure LDAP
• The server’s IP address
[root@kvmnet root]# set_timezone
Please choose the time zone where this machine is located.
1) Africa 18) Eire 35) Jamaica 52) ROC
...
17) Egypt 34) Israel 51) Portugal 68) zone.tab
Enter the number corresponding to your choice:
Enter the number corresponding to your choice: EDT