User`s guide

Configuring Authentication [OSD]
492
AlterPath OnSite Administrator’s and User’s Guide
See Table 7-29 for a list of tasks for configuring authentication servers
and where to find the tasks are documented.
T To Configure a Kerberos Authentication
Server
[OSD]
Perform the following to identify the authentication server when the OnSite or
any of its ports is configured to use either the Kerberos, Local/Kerberos,
Kerberos/Local, or KerberosDownLocal authentication method.
Before starting this procedure, find out the following information from the
Kerberos server’s administrator:
• Realm name and KDC address
• Host name and IP address for the Kerberos server
Table 7-29: Tasks for Configuring Authentication Servers
Authentication Type Where Documented
Kerberos, Local/Kerberos, Kerberos/Local,
or KerberosDownLocal
“To Configure a Kerberos Authentication
Server [OSD]” on page 492
LDAP, Local/LDAP, LDAP/Local, or
LDAPADownLocal
“To Configure an LDAP Authentication
Server [OSD]” on page 494
RADIUS, Local/RADIUS, RADIUS/Local,
or RADIUSDownLocal
“To Configure a RADIUS Authentication
Server [OSD]” on page 496
TACACSPlus, Local/TACACSPlus,
TACACSPlus/Local, or
TACACSPlusDownLocal
“To Configure a TACACS+ Authentication
Server [OSD]” on page 496
SMB “To Configure an SMB Authentication
Server [OSD]” on page 497
NIS, Local/NIS, NIS/Local, or
NISDownLocal
“To Configure an NIS Authentication
Server [OSD]” on page 497