User`s guide

Configuring the Saving and Restoring of Configuration Files [OSD]
488
AlterPath OnSite Administrator’s and User’s Guide
• To disable PPP, select the “disabled” option and go to Step 6
The “callback” screen appears.
4. On the “IP local” screen, specify the local IP address.
The “IP remote” screen appears.
5. On the “IP remote” screen, specify the remote IP address.
The “Callback” screen appears.
6. On the “Callback” screen, do one of the following:
• To disable callback, select the “disabled” option.
If callback is disabled, this is the last step.
• To enable callback, select the “enabled” option and go to Step 7
The “callback phone” screen appears.
7. If callback is enabled, enter a callback phone number.
Configuring the Saving and Restoring of
Configuration Files [OSD]
An administrative user can use the Save/Load Config menu options to save
the configuration to flash and to upload or download the configuration file to
or from an FTP server.
T To Save Configuration Files to Flash [OSD]
1. Go to: Configure>Save/Load Config.
The “Save/Load Config” screen appears.
2. Select “Save Configuration.”
The following two messages appear.