User`s guide

OSD for All User Types 487
Configuring PCMCIA Cards [OSD]
Figure 7-45:Configure>User Station: Port Info Screen
T To Specify the Keys Used in the Command
Key Portion of the
Port Info Keyboard
Shortcut
[OSD]
1. Go to: Configure>User Station>Idle Timeout>Screen Saver Time>Cycle
Time>Keyboard Type>Quit>Power Management>Mouse/Keyboard
Sync>Video Configuration>Switch Next>Switch Previous>Port Info.
The Port Info screen appears.
2. Type the last letter of the port info keyboard shortcut.
3. Select Save to save your configuration.
Configuring PCMCIA Cards [OSD]
An administrative user can use the PCMCIA screen to configure an installed
and configured modem card. You can allow a user to call in through PPP or
enable callback.
T To Configure a PCMCIA Card [OSD]
1. Go to Configure>PCMCIA.
The “Slot” screen appears.
2. Select the slot (slot 1 or slot 2) where the PCMCIA card is installed.
The “PPP” screen appears.
3. Select one of the following:
• To enable PPP, select the “enabled” option and go to Step 4
The “IP Local” screen appears.