User`s guide

Configure>Date/Time [OSD]
480
AlterPath OnSite Administrator’s and User’s Guide
See “Configuring the Saving and Restoring of Configuration Files [OSD]” on
page 488 for more information.
Configure>Date/Time [OSD]
An administrative user can use the Date/Time screens under Configure>Date/
Time to configure the OnSite date and time.
The Date/Time screen allows you to enable or disable an NTP server. If the
NTP server is disabled, more screens appear for entering the system date and
time manually.
Figure 7-39:Selecting OSD Configure>Date/time
Load from FTP
When “Load from FTP” is selected, the following four screens
appear for you to enter the “Filename,” FTP “Server” name,
FTP Login “Username” and “Password.”
Table 7-28: Save/Load Configuration Screens [OSD] (Sheet 2 of 2)
Screen Description