User`s guide

Configure>Authentication Screens [OSD]
470
AlterPath OnSite Administrator’s and User’s Guide
Caution! Before physically ejecting a card, always select the “Eject” option.
Ejecting the card without using the Eject option can cause a system panic.
See “Configuring PCMCIA Cards [OSD]” on page 487 for more information.
Configure>Authentication Screens [OSD]
An administrative user can select the Authentication option on the OSD
Configuration Menu to configure an authentication method (AuthType) for
logins to the OnSite and to configure authentication servers for any type of
logins: to the OnSite, to KVM ports, or to serial ports. See “OnSite
Authentication Options” on page 7 for details about authentication on the
OnSite.
The Authentication menu appears as shown in the following figure.
Not all options are visible.
callback phone
Appears only when PPP and callback are enabled and
“Callback Phone” is selected from the PCMCIA Modem
menu.
Table 7-21: Configuration Screens for a PCMCIA Modem Card [OSD] (Sheet 3 of 3)
Screen Description