User`s guide

OSD for All User Types 469
Configure>PCMCIA Screens [OSD]
PCMCIA Modem
Appears only when PPP is enabled. Choices are: “PPP” for
disabling and enabling PPP, “IP Local,” “IP Remote,”
“Callback,” and Exit.
Note: By default, if no local IP is specified, the IP address of
the OnSite is used. If no remote IP is specified, the IP address
10.0.0.1 is used. Use the default IP address unless you have a
specific reason to use another.
IP Local
Appears only when PPP is enabled and “IP Local” is selected.
IP Remote
Appears only when PPP is enabled and “IP Remote” is selected.
callback
Appears only when “Callback” is selected. Choices are:
“disabled” and “enabled.”
PCMCIA Modem
Appears when callback is enabled with an additional option:
“Callback Phone.”
Table 7-21: Configuration Screens for a PCMCIA Modem Card [OSD] (Sheet 2 of 3)
Screen Description