User`s guide
Configuring Users and Groups [OSD]
458
AlterPath OnSite Administrator’s and User’s Guide
Configuring Users and Groups [OSD]
An administrative user can use can use the “Users and Groups” screen from
the Configuration Menu to specify users and permissions.
The following table lists the configuration tasks you can perform:
Permissions for
username:
port_number or for
username: followed
by another Access
list option, such as
“Default” or
“Multiple Servers”
The permissions from this menu can be configured to be
“Default” permissions for all ports, applied to Multiple Servers,
or applied to a selected port.
Permissions options are “No Access,” Read-Only,” “Read
Write,” “Read/Write/Power,” and “Default.” When “Default”
was selected on the previous menu, the “Not Defined” option
also appears on the menu.
Task Where Documented
Add a user. “To Configure Users [OSD]” on page 459
“To Add a User [OSD]” on page 460
Change a user’s password. “To Change a Password [OSD]” on page 460
Delete a user. “To Delete a User [OSD]” on page 460
Add a group. “To Add a Group [OSD]” on page 461
Add a user to a group. “To Add a User to a Group [OSD]” on page
461
Delete a user from a group. “To Delete a User from a Group [OSD]” on
page 462
Table 7-19: User Access List KVM Port Permissions Configuration Screens [OSD] (Sheet 3
of 3)
Screen Description