User`s guide
Configure>Users and Groups Screens [OSD]
456
AlterPath OnSite Administrator’s and User’s Guide
administratively-configured users and groups. See “Understanding KVM Port
Permissions” on page 32 for details.
The following table shows the configuration screens related to setting KVM
port access permissions when the “User Access List” option is selected from
the Users and Groups menu under Configure in the OSD.
Table 7-19: User Access List KVM Port Permissions Configuration Screens [OSD] (Sheet 1
of 3)
Screen Description
Select User/Group
“[Generic Users]” and any administratively-defined users and
groups are listed, along with the “Exit” option.
The Generic Users’ permissions apply to all users except for
“admin” and any users in the “admin” group. By default, the
Generic Users’ default permission is “No Access,” and no
KVM port permissions are defined. Therefore, by default, any
regular users that may be added cannot access any KVM ports.
The OnSite administrator can configure access to KVM ports
for added regular users by:
• By selecting “[Generic Users]” and modifying the
permissions that apply to all users who have not been
configured with specific permissions
- OR -
• By configuring specific permissions for one or more
individual users or groups (by selecting a single port or the
“Multiple servers” option)
Note: The KVM port access permissions for “admin” or for
anyone in the admin group cannot be changed. The “admin” is
not listed, but if any other administrative user’s username is
selected, the following screen displays: